Item Name | Test Standard | Service Cycle (Unit: Days) | Delivery Requirements | Qualifications |
Large plate combustion of automobile | GB8410-2006 | 7 |
Standard sizes:
356*100mm, the thickness is less than 13mm
Non-standard samples shall be delivered according to the standard requirements:
1. The width of the sample is 3 - 60mm, and the length is at least 356mm. The sample shall be made as close as to the width of the part
2. The width of the part is greater than 60mm, the length is at least 138mm, and the combustion distance is equivalent to the distance from the first marking to the flame extinguishing or the distance from the first marking to the sample end;
3. If the width of the sample is 3 - 60mm, and the length is less than 356mm, or the width of the part is greater than 60mm and the length is less than 138mm, the standard test cannot be carried out
|
CNAS |
HB flame retardant grade | UL94-2018 section 7 | 7 | 125*13mm, thickness < 13mm | NO |
V-0, V-1, V-2, flame retardant grade | UL94-2018 section 8 | 10 |
125*13*(0.025 - 13)mm
The sample shall be regular and smooth
|
NO |
Limited oxygen index | GB/T 2406.2-2009 | 7 |
Plastic: 80 - 150*10mm, the thickness is less than 10.5mm
Foam materials: 80 - 150*10*10mm
Film or soft film: 140*52mm*original thickness
Thin film: 140 - 200*50 mm*original thickness, 30pcs
|
CNAS |