AEC-Q200 Product Test of Resistance-capacitance Inductances and Other Components

Our Services Failure Analysis AEC-Q200 Product Test of Resistance-capacitance Inductances and Other Components

AEC-Q200 Product Test of Resistance-capacitance Inductances and Other Components

AEC-200 test standard specifies in detail the operating temperature range of passive components in each component environment in the car, strictly distinguishes the test items of various components, and makes relatively perfect regulations on the test applicability of general series of components. GRG Test can provide you with more professional and reliable AEC-Q200 selection certification test services and help suppliers to carry out certification tests based on the type and use of devices.

Advisory Message Online Consultation

Products Viewed

Lighting Products

Test of Electric Power Safety Tools and Instruments

Rapid Testing of Agricultural and Veterinary Drugs

Asbestos Test

Service Introduction

Passive components such as resistance-capacitance inductance are widely used in various electronic modules of automobiles, including those of the same series but with different functions, and there are a wide variety of such products for choice. But in the reliability test of these components, problems such as project repeatability and inapplicability are often encountered. Therefore, it is necessary to establish a refined standard for the automobile industry to help the main engine factory to classify and select suppliers' products, so that quality control can be strengthened and test efficiency improved.

Test Cycle:

2-3 months, during which comprehensive certification plan, testing and other services will be provided

Product Scope:

Ceramic capacitors, aluminum electrolytic capacitors, thin-film capacitors, differential mode inductances, common mode chokes, filters, PF inductances, transformers, wireless charging, resistances, thermistors, adjustable capacitors or resistances, varistors, PPTC, quartz transistors, ceramic resonators, ferrite EMI spike-killers, etc.

Test Items:

S/N	Test Items	Sample Number/Batch	Batch Number	Test Method
S/N	Test Items	Sample Number/Batch	Batch Number	Test Method
1	Pre- and Post- Stress Electrical Test	All products submitted for certification		User specifications
3	High Temperature Exposure (Storage)	77 Note B	1	MIL-STD- 202 Method 108
4	Temperature Cycling	77 Note B	1	JESD22 Method JA-104
5	Destructive Physical Analysis	10 Note B	1	EIA-469
6	Moisture Resistance	77 Note B	1	MIL-STD- 202 Method 106
7	Biased Humidity	77 Note B	1	MIL-STD- 202 Method 103
8	Operational Life	77 Note B	1	MIL-STD-202 Method 108、MIL-PRF- 27
9	External Visual	All products submitted for certification		MIL-STD- 883 Method 2009
10	Physical Dimension	30	1	JESD22 Method JB-100
11	Terminal Strength (Leaded)	30	1	MIL-STD- 202 Method 211
12	Resistance to Solvents	5	1	MIL-STD-202 Method 215
13	Mechanical Shock	30 Note B	1	MIL-STD- 202 Method 213
14	Vibration	30 Note B	1	MIL-STD-202 Method 204
15	Resistance to Soldering Heat	30	1	MIL-STD-202 Method 210
16	Thermal Shock	30	1	MIL-STD-202 Method 107
17	ESD	15	1	AEC-Q200-002 or ISO/DIS 10605
18	Solderability	15 each condition	1	J-STD-002
19	Electrical Characterization	30 Note A	3	User specifications
20	Flammability	/	/	UL-94
21	Board Flex	30	1	AEC-Q200-005
22	Terminal Strength (SMD)	30	1	AEC-Q200- 006
23	Beam Load Test	30	1	AEC-Q200- 003
24	Flame Retardance	30	1	AEC-Q200-001
25	Rotation Life	30	1	MIL-STD-202 Method 206
27	Surge Voltage	30	1	JIS-C-5101- 1
29	Salt Spray	30	1	MIL-STD-202 Method 101
30	Electrical Transient Conduction	30	1	ISO-7637-1
31	Shear Strength	30	1	AEC-Q200-004
32	Short Circuit Fault Current Durability	30	1	AEC-Q200-004
33	Fault Current Durability	30	1	AEC-Q200-004
34	End-of-life Mode verification	30	1	AEC-Q200-004
35	Jump Start Endurance	30	1	AEC-Q200-004
36	Load Dump Endurance	30	1	AEC-Q200-004